7201C 7202C 7203C A Pair Of Angular Contact Ball Bearings

Single-Row Angular Contact Ball Bearings

Can Only Bear Axial Load In One Direction, And Additional Axial Force Will Be Caused When Bearing Radial Load. And Only Limit The Axial Displacement Of The Shaft Or Housing In One Direction. Angular Contact Ball Bearings Have A Contact Angle Of 40 Degrees, So They Can Withstand Large Axial Loads. Angular Contact Ball Bearings Are Of A Non-Separation Design, And The Shoulders On Both Sides Of The Inner And Outer Rings Are Not High Or Low. In Order To Increase The Load Capacity Of The Bearing, The Shoulder On One Side Is Machined Lower, So That The Bearing Can Fit More Steel Balls

Angular Contact Ball Bearing Accuracy Class Includes Dimensional Tolerance And Rotation Accuracy. Precision From Low To High Is Expressed As P0(Common), P6(P6x), P5, P4, P2. In Addition, P3, P7, And P9 Are Also Used In European And American Brands To Indicate Accuracy Levels, P3 Is Equivalent To P6 Of Iso And Jis Standards, P7 Is Equivalent To P4, And P9 Is Equivalent To P2